ADI's LTC7060 drives two N-channel mosfet half-bridge structures with supply voltages up to 100 V. Both high - and low-side drivers can drive MOSFETs with different ground references, providing excellent noise and transient immunity.
Analog Devices' LTM8073 Silent switch regulators can safely operate from unregulated or fluctuating 24 V to 48 V input power supplies in noisy environments such as communications infrastructure, factory automation, industrial robotics and avionics systems. The mute switcher construction minimizes EMC/EMI emissions and enables the LTM8073 to pass CISPR 22 Class B for signal processing applications, including imaging and RF systems.
The HMC8412 of Analog Devices is a gallium arsenide (GaAs), a monolithic microwave integrated circuit (MMIC), a pseudomorphic high electron mobility transistor (pHEMT), and a low noise broadband amplifier with operating frequencies ranging from 0.4 GHz to 11 GHz.
The ADE9153 of Analog Devices is a single-phase electricity metering automatic calibration IC mSure automatic calibration function that allows the instrument to automatically calibrate the current and voltage channels, instead of using an accurate source or accurate reference instrument, the shunt resistor is used as a current sensor. Levels 1 and 2 are automatically calibrated by mSure. ADE9153 integrates three high-performance analog-to-digital converters (adc), providing 88 dB signal to noise ratio (SNR)
Analog Devices' AD7291 is a 12-bit, low-power, 8-channel Successive Approximation Register (SAR) analog-to-digital converter (ADC) with a built-in temperature sensor. The ADC is powered by a 3.3V power supply and has an I2c compatible interface. This section includes a 9-channel multiplexer and a track-hold amplifier that can handle frequencies up to 30 MHZ. The device has an on-chip 2.5V reference that can be disabled to allow the use of external references.
ADRF5046 from Adeno Semiconductor is a reflective single-pole four-throw (SP4T) switch manufactured in a silicon process. 20 terminal, 3 mm x 3 mm, RoHS compliant, ground gate array (LGA) package, operating temperature range -40°C to +105°C
Analog Devices ADuCM362/ADuCM363 is a fully integrated, 3.9 kSPS, 24-bit data acquisition system consisting of a dual, high-performance, multi-channel Sigma-Delta adc, 32-bit ARM Cortex-M3 processor, And Flash/EE memory on a single chip. These devices are designed to connect directly to external precision sensors for either wired or battery-powered applications.
The LT3094 from Analog Devices is a high performance, low dropout (LDO) negative linear regulator. Has stable minimum ceramic output capacitance of 10μF. The built-in protection device includes internal foldable current limiting and thermal hysteresis current limiting. These supervisors provide MSOP and DFN packages. They are ideal regulators for noise sensitive applications found in RF, instrumentation and medical applications
Analog Devices' ADT7310 and ADT7410 are high-precision digital temperature sensors. They contain a bandgap temperature reference and an ADC for monitoring and digitizing the temperature. The ADC resolution is set to 13 bits (+0.0625°C) by default. This resolution becomes 16 bits (+0.0078°C) by setting bit 7 in the configuration register.
The Analog Decices LTC3310S is a very small, low-noise, monolithic step-down DC/DC converter capable of delivering up to 10 a output current from 2.25V to 5.5V input power. This part uses a silent switch-2 structure with an internal hot-ring bypass capacitor to achieve low EMI and high efficiency at switching frequencies up to 5mhz. For systems with high power requirements, multiphase parallel converters are easy to implement.
Analog Devices amplifier, ADC driver and industrial data acquisition front-end for high side low sensing
Analog Semiconductor ADI's AD7291 is a 12 bit, low-power, 8-channel SAR analog-to-digital converter (ADC) with a built-in temperature sensor. This ADC is powered by a 3.3 V power supply and has an I2c compatible interface. This part includes a 9-channel multiplexer and a track and hold amplifier, which can handle frequencies up to 30 MHz.
Analog Semiconductor ADI's ADE9153 is a single-phase electricity metering automatic calibration IC mSure automatic calibration function that allows the instrument to automatically calibrate the current and voltage channels. When accurate sources or accurate reference instruments are not used, shunt resistors are used as current sensors
Analog Devices stores the front end of the ADPD4200 multimodal sensor. The device acts as a complete photometric sensor front end, stimulating up to four leds while measuring the return signal of up to four independent current inputs. The sensor front end is ideal for a variety of applications, including wearable health and fitness monitors, industrial monitoring, and home patient monitoring devices.
Analog Devices, Inc. (ADI) launched the multi protocol industrial Ethernet switch platform ADIN2299, which aims to meet the connection requirements in the fields of industrial and process automation, motion control, transportation and energy automation.
The Analog Devices Inc. ADL8105-EVALZ evaluation board is a 4-layer printed circuit board (PCB) made of 10mil Rogers 4350B and Isola 370HR copper cladding with a nominal thickness of 62mils.
