EPCOS/TDK B82472N6 SMT power inductors are now available from Mouser, ideal for switching power supplies, off-line non-insulated AC/DC converters, industrial electronics and consumer electronics.
TDK provides screw terminal EPCOS aluminum electrolytic capacitors B43706*, B43726* series. An obvious feature is the high current rating capability up to 56.1a AC (100Hz, 85 ° C). Under standard operating conditions (e.g., 300Hz, 60C, 2m/s), the current can even reach 100A. Robust capacitors have a service life of 12,000 hours at 85℃. The new capacitor is particularly suitable for frequency converters and industrial power supplies as well as UPS systems
The TDK HPL505032F1 inductor is a high-current, low-inductance product suitable for CPU and GPU power circuits. The inductor provides rated current 1.5 times higher than existing products and supports up to 40A to 50A current. Operating range includes -55C and +155°C. Inductors are provided aEC-Q200 compliant for ADAS(Camera Level 5) applications.
TDK has increased the range of its TVS diodes with significantly low bidirectional overvoltage protection, with the sd01005sl-ulc101 having a minimum capacitance of ~0.5pF and the sd0201sl-ulc101 having a minimum capacitance of ~0.6pF, both at 1MHz. The new TVS diode has a maximum operating voltage of 3.3V. In WL-CSP, they are only 400µm × 200µm (WL-CSP01005) or 600µm × 300µm (WL-CSP0201) in size and 100µm(01005) or 150µm(0201) in height. The diode is ideal for high speed interface IC and reliable ESD protection for data lines
TDK has upgraded its Micronas 3D HAL Right-angle Hall effect sensor family, HAL 37XY (HAL 37XY, HAR 37XY and HAC 37XY) for functional safety aspects in automotive and industrial applications. The company incorporates vertical Hall plates into standard CMOS processes through its 3D HAL technology, this powerful right-angle sensor family offers superior temperature stability, high electrical impedance air gap variation and magnet aging, a variety of diagnostic features and very effective protective circuitry.
TDK has added a new three-phase AC input model to the TDK-Lambda DRB series of low-cost DIN rail mounting power supplies. DRB three-phase series is also an ideal product for a wide range of applications. It also accepts a wide range of inputs from 350 to 575VAC, with isolation of input to output at 3,510VAC, ground input at 2210VAC, and ground output at 1390 VAC. It is certified by IEC/EN/UL/CSA 62368-1, 61010-1, 61010-2-201 and E/UKCA low voltage, EMC and RoHS directives
TDK has expanded its Micronas Right-angle Hall effect sensor family with HAR 3927. The device provides a fully redundant sensor solution for safety-critical automotive applications. Each sensor consists of two stacked molds that work independently. The device also comes in a small 8-pin SOIC8 package.
TDK has released the Tronics AXO315, a small, high-performance single-axis closed-loop digital MEMS accelerometer. Its features allow for significant reductions in size, weight and material cost, making it suitable for a variety of applications. The device provides a force balancing architecture, a 24-bit digital SPI interface and SMD package.
TDK Corporation has extended its MiniCell range to incorporate pressure transmitters in robust stainless-steel casing that measure differential pressure in industrial applications. , where microicell uses a high alloy AISI 316L steel film on the pressure port to provide dielectric resistance, ideal for industrial applications.
TDK offers the new L860 NTC thermior chip, which can be embedded directly into the power module and used for sintering and AI heavy wire bonding. Lead-free chips are suitable for a wide temperature range from -55C to +175C, with a size of 1.6mm x 1.6mm x 0.5mm. It is an ideal device for integration into IGBT and IPM modules
TDK Corporation has released the new B78416A* series of compact EPCOS transformers with EP six cores for ultrasonic applications
TDK offers the AVD series of new pressure transmitters. Transmitters with B58621V* order code are available in three versions for different pressure measurement ranges.
TDK has expanded its range of bipolar DC high voltage contactors with the inclusion of the new HVC43 (B88269X3**0C011) family
TDK Corporation offers a new series of EPCOS power capacitors for DC link applications. The new capacitors are provided for rated voltages of 700VDC to 2000VDC and cover a capacitance range of 20µF to 270µF.
TDK Corporation now offers tiny high-power TVS diodes for ESD protection, increasing its portfolio of components for bidirectional overvoltage protection of I/O interfaces.
TDK Corporation has added a 48V, 83.3A 4kW output power supply to TDK-Lambda’s TPS series. The TPS4000-48 works from an industrial three-phase input.
TDK Corporation offers two new series of EPCOS power capacitors for AC filtering in three-phase delta connection applications.
TDK Corporation has introduced the TDK-Lambda brand CUS400M medical and industrial certified AC/DC power supplies, packaged in the industry-standard 3” x 5” footprint.
