Diodes introduced a highly integrated dual channel USB Type-C protocol decoder for various opportunities of rapid increase in charging of USB pre installed in the vehicle. The AP43776Q supports USB Power Transfer (PD) 3.1 Standard Power Range (SPR), Programmable Power Supply (PPS), and Quick Charge QC5 fast charging protocol. This product also supports the old battery charging (BC) 1.2, which optimizes the performance of the multi port USB device charging system.
The PI90LV044 and PI90LVB044 are monolithic dual 2x2 asyn- chro nous crosspoint/repeater switches. The crosspoint function is based on a multiplexer tree architecture. Each 2x2 switch can be considered as a pair of 2:1 multiplexers that share the same inputs.
Diode AL5871Q is an automotive class single-channel linear LED driver with PWM and analog dimming control. The AL5871Q can be driven up to 750mA and the LED current can be set via a low-power reference resistor connected to the REF pin.The AL5871Q regulates LED current accurate to ±4%, with excellent PWM and analog dimming performance. The AL5871Q enters standby mode to save power if no PWM signal is detected.
Diodes will introduce its latest PCIe 3.0 packet switcher DIODES PI7C9X3G1224GP. This product is a high-performance 12 port, 24 channel device that can be used for edge computing, data storage devices, communication infrastructure, and integrated into host bus adapters (HBAs), industrial controllers, and network routers
PAM2325 is a 3.5A buck synchronous converter. 1.2MHz switching frequency allows the use of small external components. The ultra small 2mm x 2mm footprint and high efficiency make PAM2325 an ideal choice for portable applications. The rated temperature range is - 40 ° C to+85 ° C.
Diodes Incorporated offers its latest PCIe 3.0 packet switch, the DIODES PI7C9X3G1224GP. This high-performance 12-port, 24-lane device can be employed in edge computing, data storage, communications infrastructure and integrated into host bus adaptors, industrial controllers, and network routers.
Diodes Incorporated PI2DPT1021 10Gbps Bi-Directional Retimer is a bit-level retimer with receiver adaptive CTLE and transmitter 3-tap equalization, which can compensate channel loss up to -23dB for 5GHz signal transmission. It supports DP 1.4 and USB 3.2 standards for USB Type-C DP ALT mode operation.
Diodes further strengthens its range of PCIe solutions with a new ReDriver device with high data rates. PI2EQX16924 is a PCIe 4.0 ReDriver that can operate over a 1.8V rail, while competing solutions require 3.3V rail, making it suitable for a wide variety of computing and data communication applications.
Diodes AL5890 provides temperature stability and current accuracy. Adjust ±2.0 mA(typical) over a wide range of voltages and temperatures. The AL5890 has a variety of fixed output current options, eliminating the need for external current setting resistors and creating a simple drive solution for a range of leds
Diodes has announced the addition of three new 20Gbps devices rated at 1.8V to its large scale programmable multichannel linear ReDrivers product line. Designed to address the rapidly growing USB4 Gen3, Thunderbolt 4.0, and DisplayPort 2.0 standards.
Diodes introduced two types of precision power amplifiers (op amps) for different signal frequency conditions to meet the needs of advanced signal regulation in modern automobile design. DIODES ™ AS2376Q's low signal-to-noise ratio characteristics indicate that it has been optimized in high-frequency use, such as on-board charger (OBC), DC-DC converter, battery management system (BMS) implementation, pump, airbag, position sensor and occupancy detection system
Diode is addressing the need for advanced signal conditioning in modern automotive designs by releasing two precision operational amplifiers for different signal frequency scenarios. The low SNR nature of diode AS2376Q means that it is optimized for high frequency use such as OBCs, DC-DC converters, BMS implementations, airbags, pumps, position sensors and occupancy detection systems
Diodes introduces the latest product in ReDrivers' extensive portfolio, the 1.8V low-power, 4-data channel 2.5Gbps ReDriver. DIODES PI2MEQX2505 support a MIPI D - PHY ReDriver 1.2 communication protocol, locking action and Internet application.
Diodes Incorporated offers its latest addition to its wide portfolio of ReDrivers with the release of a 1.8V low-power, four data lanes 2.5Gbps ReDriver. The DIODES PI2MEQX2505 is the first ReDriver in the industry to support the MIPI D-PHY 1.2 protocol and is aimed at mobile and IoT applications.
Diodes has announced the addition of three new 20Gbps devices rated at 1.8V to its large scale programmable multichannel linear ReDrivers product line. Designed to address the rapidly growing USB4 Gen3, Thunderbolt 4.0, and DisplayPort™ 2.0 standards.
Diodes Incorporated has added to its comprehensive range of programmable multi-channel linear ReDrivers, offering three new 20Gbps devices with 1.8V voltage ratings satisfying fast-growing USB4 Gen3, Thunderbolt 4.0 and DisplayPort 2.0 standards. The DIODES ReDrivers PI2DPX2020, PI2DPX2023, and PI2DPX2063 are aimed at use in laptops, desktop PCs, active cables, workstations, monitors and docking applications. Their low power consumption and compact, low-profile packaging makes them positively optimised for tablets and notebook computers.
Diodes Incorporated (Diodes) has announced a diverse product portfolio supporting the new PCI Express (PCIe) 5.0 protocol. This includes ReDrivers, switches, clock generators and clock buffers for portable and desktop computing, data center and high performance computing (HPC) product applications.
Diodes Incorporated offer a series of bidirectional current monitors based on a high-stability zero-drift architecture. These devices can accurately measure very low sense voltages over a wide range of common-mode voltages. Key applications include servers, power supply racks in server farms, laptop PCs, battery chargers, industrial servos, and robotic systems.
