NKK’s elegantly designed frameless OLED SmartSwitch, the high-definition pushbutton has a contrast and resolution of 96 RGB x 64 pixels in a compact frame. With a range of 65,536 colours in a 16-bit mode, the frameless pushbutton has redefined the SmartSwitch line. It possesses the same footprint as current SmartSwitches, allowing for easy replacement of current 64 x 48 OLED switch models.
Vishay SiHx28N60EF / SiHx33N60EF EF Series Power MOSFETs, the 600V fast body diode N-Channel power MOSFETs were developed for ZVS / soft switching PWM topologies such as phase shifted bridges and LLC converter half bridges. The SiHx28N60EF / SiHx33N60EF EF Series Power MOSFETs increase reliability in these applications by delivering a 10x lower Qrr than standard MOSFETs.
Intersil has unveiled PowerNavigator version 5.2, a free, downloadable graphical user interface (GUI) that helps system designers quickly configure, validate and monitor their power supply architectures. The new features included in PowerNavigator 5.2 enable a high degree of power supply optimization. Combined with the drag-and-drop GUI interface, PowerNavigator 5.2 makes it straightforward to change features and functions of a digital power supply design without writing a single line of code.
CUI has introduced a new 3000W front-end AC/DC power supply for mission-critical (N+1) redundant applications. The PSE-3000-48 delivers a power density of 33.48W/cubic inch and achieves Platinum efficiency in a compact standard 1U package measuring just 40.64mm x 101.6mm x 355.6mm).
Designed to deliver circuit protection in Gigabit Ethernet applications, smartphones, video card interfaces and more – ProTek Devices has introduced a new ultra low–capacitance (0.9pF) steering diode / transient voltage suppressor array (TVS array). The PAZC099 is rated for 5V applications with 100 watts peak pulse power per line (8/20 micro seconds). It is also ideal for circuit protection in USB 1.0, 2.0 and 3.0 applications, DVI interfaces and other portable electronics, says the company.
Linear Technology has introduced the LTC6268-10, a new series of single and dual LTC6269-10 4GHz FET-input op amps for high dynamic range and high speed transimpedance amplifier (TIA) applications. The decompensated amplifiers extend the speed and dynamic range capabilities of this ultralow bias current op amp family for applications with a gain of 10 or higher.
The ADA4571 Integrated AMR angle magnetic sensor and signal conditioner from Analog Devices. Consisting of both an anisotropic magneto-resistive sensor and a fixed gain instrumentation amplifier, the ADA4571 is one of the industry’s highest-precision, highest-speed magnetic angle sensors that is four times more accurate, 60 percent faster, and 40 percent more power efficient than competing angle sensor solutions, says the company.
Lattice Semiconductor has introduced the MachXO3LF as the newest member of its MachXO3 FPGA family, which provides essential bridging and I/O expansion functions to meet the increasing connectivity requirements of communications, computing, consumer and industrial markets.
Datasound Laboratories (DSL) has unveiled a new series of passively cooled Intel Core i7 processor based fanless Panel PC’s. The front IP65 protected APC-3×19 Panel PCs, specified for 0-50C operation contain no moving parts - meaning reliability and longevity, the key stones of industrial and embedded computing, are satisfied with ease. For ultimate reliability the APC-3×19 Panel PCs also natively support RAID, says the company.
The CoolZorb 400 Series Thermal and EMI absorbent material from Laird Technologies. The CoolZorb 400 is a sponge-like material applied to electronic components that is effective in both dissipating heat and absorbing electromagnetic interference (EMI). The CoolZorb 400 is used like traditional heat sink compounds and is applied between an IC and a heat sink, while demonstrating significant advantages over traditional heat sink compounds including improved heat transfer and EMI suppression.
The Murata XRCGB-F-A series crystal units are designed for automotive applications to deliver consistent superior quality with mass production capabilities Available in cut tape with next day delivery the XRCGB-F-A series crystal units are ideally suited to the automotive industry due to their compact size 2016-size (2mm x 1.6mm), and highly precise nature while supporting high frequencies.
The UCC28910 and UCC28911 from Texas Instruments are high-voltage fly-back switchers that provide output voltage and current regulation without the use of an optical coupler. Both devices incorporate a 700V power FET and a controller that process operating information from the fly-back auxiliary winding and power FET to provide a precise output voltage and current control.
Radiall’s new MML micro-miniature coaxial connector series address the market demand for smaller systems in products such as cell relay, WiFi access points, GPS and other mobile terminals. There are three types of plugs with mated heights of, H2.5, H2.0 and H1.5, as well as two types of vertical PCB receptacles with good electrical performance up to 6GHz.
Aimed at applications such as low- to mid-power LED lighting systems, Fairchild’s primary-side-regulated LED driver with power factor correction. The device delivers constant brightness and instant flicker-free turn-on of LED lighting. The new low-power LED lighting driver is built for a variety of 5W to over 60W, indoor and outdoor LED applications so that designers can easily overcome the challenge of meeting global standards and regulations for LED lighting with a single, scalable solution, says the company.
PIL has announced availability of its new P43 distance-measuring ultrasonic sensors. Applications include object recognition for agriculture and fluid levels, distance measuring for trucks and loading ramps, level sensing in dusty conditions, parking lot detection/barrier monitoring as well as a variety of other industrial and manufacturing applications. The PIL P43 ultrasonic sensors provides the industry’s greatest range – from 250mm to up to 6000mm, says the company.
The rugged Molex ML-XT sealed connector system is cost-effectively offers superior reliability. The ML-XT system’s plastic housing and seal are moulded using a one-piece design, which is not only economical but also highly-reliable. Permanent bonding using two-shot liquid silicone rubber (LSR) moulding technology ensures IP68 ingress resistance as well as immunity to loss or misalignment of the seal. Accurate alignment ensures repeatable retention during unmating and mating of the plug and receptacle.
The new S12ZVC MagniVT mixed-signal microcontroller from Freescale Semiconductor. The S12ZVC 16 bit MCU is based on a 32MHz S12Z core and has 192 KBytes of Flash memory, 12 KBytes of RAM, 2 KBytes of EPROM, integrates CAN Physical Layer, a 12 bit analog to digital converter (ADC), 8 bit DAC, and more.
To meet increasing demands from the automotive market, Syfer Technology has improved its offering of AEC-Q200 qualified devices. In particular its multilayer ceramic capacitors (MLCC’s) and EMI filter products now have extended ranges.
