The MAX3237E consists of 5 line drivers, 3 line receivers and a dual charge pump circuit with ±15 kv ESD protection pin-to-pin (serial port connection pins including GND). The device meets the TIA/EIA-232-F requirements and provides an electrical interface between an asynchronous communication controller and a serial port connector.
The LT3023 is a dual, micro-power, low noise, low drop regulator. 10-lead MSOP and DFN packages available for thermal enhancement. The output noise is reduced to 20μVRMS in the bandwidth of 10Hz to 100kHz by using an external 0.01μF bypass capacitor. The device is adjustable with a reference voltage of 1.22V.
Texas Instruments UA78M series fixed voltage integrated circuit regulators are designed for a wide range of applications. These applications include eliminating noise card adjustment and distribution problems associated with single point adjustment. The internal current limiting and heat closing characteristics of these regulators essentially make them immune to overload
The LM2576 series voltage regulator is a monolithic integrated circuit that provides all the active functions of a step-down (step-down) switching regulator, capable of driving 3A loads with excellent line and load regulation. These devices are available in fixed output voltage and adjustable output versions of 3.3V, 5V, 12V, and 15V.
Skyworks SKY65352-11 is an efficient front-end module (FEM). The device contains an efficient transmission path of 2400 ~ 2500 MHz and a low noise receiving path. The device is installed in a 20-pin, 6 x 6 mm multi-chip module (MCM) surface-mount technology (SMT) package, enabling a highly manufacturable low-cost solution.
LTC4364 Surge blocker with ideal diode controller protects loads from high voltage transients. It limits and regulates the output during an overvoltage event, such as a load dump in an automobile, by controlling the voltage drop of an external n-channel MOSfet-pass device.
APDS-9702 is a signal conditioning IC that enhances the performance and robustness of optical sensors for proximity or target detection. The device comes in an 8-pin QFN package with dimensions of 0.55mm(H) x 2mm(W) x 2mm(L). It can operate in the voltage range of 2.4V to 3.6V. Has two separate analog and digital output pins. This provides the flexibility to use analog or digital output (or both) depending on the requirements of the application
The ICL7650S Super Chopper Stabilized amplifier provides extremely low input bias voltage and is extremely stable in terms of time and temperature. It is a direct replacement for the industry standard ICL7650, offering improved input bias voltage, lower input bias voltage temperature coefficient, lower input bias current, and wider common-mode voltage range. In addition, the ICL7650S internally compensates for unit gain operation.
The HA-5320 is designed for use in precision, high-speed data acquisition systems. The circuit consists of an input transconductance amplifier, a low leakage analog switch and an output integrated amplifier, which can provide high current charging. The monolithic device is manufactured using an Intersil dielectric isolation process that minimizes stray capacitance and eliminates SCRS.
The AT24C32A/64A provides 32,768/65,536 bit serial electrically erasable and programmable read-only memory (EEPROM), organized into 4096/8192 8-bit words. The cascading nature of the device allows up to eight devices to share a common 2-wire bus. The equipment is optimized for many industrial and commercial applications where low power and low voltage operations are essential.
The ISL6744A is a low-cost, primary, dual-ended controller for full - and half-bridge topologies using random DC/DC converters. It is a voltage type PWM controller suitable for half - bridge and full - bridge power supply.
The QME48T20120 converter of the QME-Series provides outstanding thermal performance in high temperature environments. This performance is accomplished through the use of patented/patentpending circuits, packaging, and processing techniques to achieve ultra-high efficiency, excellent thermal management, and a low-body profile.
The CC1150 is a true single chip UHF transmitter designed for extremely low power wireless applications. The circuit is primarily used in the 315-, 433-, 868-, and 915-MHz bands of ISM(Industrial, Scientific, and medical) and SRD(Short range devices), but can easily be programmed to run on other frequencies in the 300-348 MHz, 400-464 MHz, and 800-928 MHz bands.
The DS18B20 digital thermometer provides 9 - to 12-digit Celsius temperature measurement and features a non-volatile alarm function with user programmable up and down trigger points. The DS18B20 communicates over a 1-wire bus, which by definition requires only one data line (and ground) to communicate with the central microprocessor.
The CY22381 is a next-generation programmable Flash programmable clock for networking, telecommunications, data communications, and other general purpose applications. The CY22381 offers up to three configurable outputs in an 8-pin SOIC, powered by a 3.3V power supply.
The LTC 2351-14 is a 14-bit, 1.5Msps ADC with six sampled differential inputs. The device only obtains 5.5mA from a single 3V power supply and uses a micro 32 pin (5mm × 5mm) QFN package. Sleep shutdown mode further reduces power consumption to 12 μ W。 The combination of low power consumption and small packaging makes the LTC 2351-14 suitable for portable applications.
The ISL9301 is a fully integrated high input voltage single-cell lithium-ion battery charger with power path management capabilities. The charger performs CC/CV charging functions required for lithium-ion batteries. The charger accepts an input voltage of up to 28V, but will be disabled when the input voltage exceeds the 10.5V OVP threshold.
The DCV01 series is a series of 1-W, 1500-Vrms isolated, unregulated DC/DC converter modules. The DCV01 family of devices requires minimal external components and includes on-chip device protection that provides additional features such as output disabling and synchronizing switching frequencies
