The Fairchild Semiconductor FSV1060V Schottky rectifier. The device is optimised for mobile charger applications and offers breakthrough performance squeezed into a small, flat-lead, TO-277 package.
The Fairchild Semiconductor FIS1100 Evaluation Kit – a 6D MEMS inertial measurement unit (IMU) with sensor fusion to specify system level orientation accuracy. When using with the supplied XKF3 9D sensor fusion, the system features an accurate ±3 degree pitch and roll orientation and a ±5 degree yaw / heading typical specification.
Fairchild FAN48623 synchronous TinyBoost regulators are designed to allow systems to take advantage of new battery chemistries. The devices can supply significant energy when the battery voltage is lower than the required voltage for system power ICs.
The FUSB300C is a generic hardware solution for designers looking to implement a DRP/DFP/UFP connector with the USB Type-C specification. The FUSB300C automates VBUS threshold detection as well as the various charging current levels, and includes an integrated VCONN power switch.
Fairchild’s FDMT8001x N-channel Dual Cool PowerTrench MOSFET is aimed at applications such as OringFET / load switching, synchronous rectification and DC-DC conversion. The device combine Dual Cool and PowerTrench processes to offer very low RDS(on) and maintain high switching performance. Also, the FDMT8001x maintains extremely low junction to ambient resistance.
The FSBB10CH120DF Motion SPM 3 Series module, part of the Motion SPM 3 module family from Fairchild Semiconductor. The FSBB10CH120DF is a smart power module (SPM) that features a 1200V, 10A three-phase inverter with short-circuit-rated insulated-gate bipolar transistors (IGBTs) that provide integral gate drivers and protection to minimize EMI.
Integrating drive and protection circuitry into a single package, Fairchild Semiconductor Motion SPM modules can be used to simplify and accelerate designs while optimizing efficiency. A full line of highly-integrated smart power modules (sometimes referred to as intelligent power modules (IPMs)) is available for a wide range of energy-saving applications.
Fairchild Semiconductor’s FL7734 primary-side regulation PWM controller is designed to minimize components for low-power LED lighting solutions.
Applications such as smart phones, tablets and ultrabooks, Fairchild’s high-performance FSA551 dual single-pole single-throw (SPSTx2) audio switch. The device’s depletion-mode technology allows it to conduct signals when there is no VCC available and to isolate signals when VCC is present.
Aimed at applications such as low- to mid-power LED lighting systems, Fairchild’s primary-side-regulated LED driver with power factor correction. The device delivers constant brightness and instant flicker-free turn-on of LED lighting. The new low-power LED lighting driver is built for a variety of 5W to over 60W, indoor and outdoor LED applications so that designers can easily overcome the challenge of meeting global standards and regulations for LED lighting with a single, scalable solution, says the company.