Power Integrations offers new single-channel plug and play gate drivers for IHM and IHV IGBT modules up to 190mmx140mm. The 1SP0635V2A0D combines Power Integrations proven and reliable SCALE-2™ switching performance and protection with a configurable isolated serial output interface to enhance driver setup flexibility and provide comprehensive telemeting reporting for accurate lifetime estimates
Power Integrations introduces SCALE-iFlex™ LT NTC Series IGBT/SiC module gate drivers. The new gate drivers are compatible with popular 100mmx140mm IGBT half-bridge modules such as Mitsubishi LV100 and Infineon XHP 2, as well as silicon carbide (SiC) derived modules with voltages up to 2300V.
Power Integrations announced the launch of 900V gallium nitride (GaN) devices, adding to the InnoSwitch3 series flyback switch IC. Using the company's proprietary PowiGaN technology, the new IC delivers up to 100W of power with an efficiency of over 93%, eliminating the need for heat fins and simplifying power design for space-constrained applications. The InnoSwitch3 design also features excellent light-load efficiency, making it ideal for providing auxiliary power to electric vehicles in low-power sleep mode
LinkSwitch II greatly simplifies the design of low power CV/CC chargers by eliminating optical couplers and secondary control circuits. The device introduces a revolutionary control technology to provide very strict output voltage and current regulation, and the compensation transformer and internal parameter tolerance vary with the input voltage.
Powell Electronics now offers Amphenol’s latest range of high-power, high-voltage connectors developed for high-voltage and high-current systems in E-Flight, E-VTOL and hybrid applications. The devices profit from a partial discharge-free performance at an operating voltage of 2kV AC(RMS) at 35.000ft, making them excellent for applications including batteries, generators, motors and power distribution units. Raptor connectors are also perfect for termination of screened HV power cables in aerospace applications.
Power Integrations has announced the addition of high-current devices to its LinkSwitch™ -tn2q automotive switch IC product line. The new devices provide up to 850mA of output current without the need for a metal radiator. This highly integrated IC supports a wide input voltage of 30 to 550VDC, enabling electronic devices in ev applications to start and work properly when below the required safe ultra-low voltage (SELV) threshold.
Power Integrations has announced the addition of the InnoSwitch™4-CZ series of high frequency, zero voltage switching (ZVS) flyback switching ics. When paired with the ClampZero™ Active Clamp IC from Power Integrations or the recently released HiperPFS™-5 GAN Power factor Correction IC, the new IC is easily compliant with the latest USB PD 3.1 standard, with adapters and chargers designed up to 220W.
Powell Electronics now offers Glenair’s MIL-DTL-38999 Series III Type fibre optic products, including qualified size 16 MIL-PRF-29504 precision ceramic termini, large core and jewel size 16 termini, and size 20 termini.
Power Integrations has announced the addition of InnoSwitch™4-CZ series of high frequency, zero voltage switching (ZVS) flyback IC. When used in conjunction with Power Integrations' ClampZero™ Active clamp IC or the recently released HiperPFS™-5 Gallium nitride Power factor correction IC, the new IC easily meets the latest USB PD 3.1 standard, designed for adapters and chargers up to 220W.
Power Integrations provides SCALE EV series door drives for Infineon EconoDUAL modules. Board level door drivers include two booster door driver channels, associated power supply and monitoring telemetry. The high level of integration provided by the innovative new drive IC allows the complete drive plate (including the gate power supply) to fit into the power module profile while still providing the spacing required for enhanced isolation according to IEC 60664. The gate driver family is rated at 1200V and is suitable for 400V and 800V systems. Support SiC MOSFET and silicon IGBT.
Power Integrations has introduced the HiperPFS-5 series OF PFC ics that integrate 750 V PowiGaN gallium nitride switches. The IC is suitable for high power USB PD adapters, TVS, game consoles, all-in-ones and home appliances. The device's innovative QR DCM control technology changes the switching frequency of the output load, input line voltage and input line cycle. Compared to the traditional CRM Boost PFC circuit, the inverter engine reduces the size of the boost sensor by more than 50%. And the powerful 750V PowiGaN switch offers other benefits
Powell Electronics offers full Nelson heat shrink boots and automatic shrink cold action shrink boots and sleeves from Glenair. Benefits from a wide temperature range (-75C to 175C heat shrinkable boots and -65C to 300C cold shrinkable boots and sleeves), and neither line requires a heavy back case or tapered adapter
Powell Electronics offers ModICE modular connector housing with SHS harness connectors from Cinch Connectivity Solutions. ModICE connector housing uses Cinch 1.5mm SHS system as basic interconnect technology. The connector housing is available in three different sizes (ME, SE, LE) and four different head configurations :18,30,48, and 60 I/O.
Powell Electronics offers the HYPB series of new IP69/IP69K stainless steel button housing for Hammond Manufacturing hygiene applications. Available with 22.5mm and 30.5mm holes, single row of one, two, three or four holes for installation, two rows of four holes for two rows of two holes for two or two rows of six holes for two rows of three holes for installation, the series benefits from a rectangular design that allows the unit surface to be mounted vertically or horizontally to suit most applications
Powell Electronics now offers the new HYJ series IP69/IP69K stainless steel junction box housing for sanitary applications manufactured from Hammond. Available in five sizes, from 202mm x 124mm x 102mm to 416mm x 338mm x 203mm(h x W x D), the rectangular design allows the unit surface to be mounted vertically or horizontally to suit most applications
Power Integrations has released the highly integrated Innoswitch 3-TN off-line CV/CC flyback IC. Safety certified compact MINSOP-16A package and other advantages. Suitable for electrical and industrial auxiliary applications up to 21W.
Power Integrations has expanded its InnoSwitch3 families of offline CV/CC flyback switcher ICs. The new INN3x78C devices include a smaller 'size 8' 750V PowiGaN transistor, enabling compact, efficient power supplies delivering between 27W and 55W without heatsinks.
Power Integrations has released its BridgeSwitch integrated half-bridge (IHB) motor driver IC family. BridgeSwitch ICs provide high and low-side advanced FREDFETs with integrated lossless current sensing, ending in inverter conversion efficiency of up to 98.5% in BLDC motor drive applications to 300W.
